Mircom Flex-Net Phase II, Application Manual

Page: 74 / 132

73
Appendix B: Using the Configurator
Advanced Compare Options
Modified - Check this box to include any item that has been modified. (Modified means that it
is the same adder, circuit, switch, etc. but some attribute has been changed.) This box is
checked by default. You would only un-check this box if you did not want to see items that
have been modified.
Present only in Secondary Job - Check this box to include items that are only present in the
secondary job. This means that Loop Adders, Annunciators, Display Adders, circuits, etc. that
were not on the base job will be included. This box is checked by default. You would only un-
check this box if you did not want to have new additions reported.
Present only in Primary Job - Check this box to include items that were only present in the
primary job. This means that that Loop Adders, Annunciators, Display Adders, circuits, etc that
were removed from the primary job will be included. This box is checked by default. You would
only un-check this box if you did not want to have deletions reported.
Note: Filtering of 'Present only in Secondary' and 'Present only in Primary' do not apply when
presenting the tree. The tree is shown in its entirety, regardless of these settings. The filtering
is only applied to the Device, Display Item and similar lists. It is intended to make it easy to see
what components have been physically added or removed from the job.
Correlations are not considered to be items in this context. If a correlation was added, then
that is effectively a modification to the item that received the correlation.
If you chose to check Present only in Secondary Job and/or Present only in Primary Job, but
you do not check Modified, then the circuits, etc. that have only had correlation changes will
not be included.