109
Appendix B: Using the Configurator
The data in the list view can be editted by pressing Enter or by chosing Edit / Modify Item from
the menu. The first editable cell in the row opens for editting. Or you can double click in the
field you want to edit.
The CPU Address can be changed. A drop down list appears, listing all of the available
addresses.
The tag can also be editted.
LED Annunciators can be added or deleted from this view. If the last instance of the
Annunciator is deleted a confirmation message appears. When the last Annunciator is
deleted, the item is removed from the job tree.
Loop Controller
This form is displayed when a Loop Controller is selected in the Job Tree view.
•
Type - Conv Adder or Loop Adder
•
Daughter board installed - Set to true/checked if the Quad Loop Controller's daughter
board is installed. If checked, the firmware monitors the presence of the additional two
loops. Set to false/un-checked if the board is not present.
•
Tag - Enter a desciption for the loop controller. This will appear in the Job Tree view
•
CPU Number - Enter the CPU address for the loop controller. The list shows all available
addresses in the internal bus range.
•
Overrides
•
These items override similar attributes on the Job Details page. They initially
show the state of the choices made on the Job Details page.
Summary of Contents for Flex-Net Phase II
