42
Hardware Layouts
14.0
Hardware Layouts
The Flex-Net Phase II Fire Alarm Control System contains two major types of nodes: Fire
Nodes and Mass Notification Nodes. The entire system is modular and any number of
combinations are possible when building a system. The Fire Nodes can use the BBX-1024,
the BBX-1072, the BB-5008 and the BB-5014 model backboxes. The Mass Notification Node
uses the BBX-FXMNS model backbox.
The system can also include Audio-Signalling Enclosure Cabinets that are able to connect to
either node and use the QBB-5000XT backbox. Local Operating Consoles use the FX-LOC
backbox and are used with Mass Notification Nodes.
14.1 Display Modules
These modules can be installed on the door of any node with display module slots. The
specific number and combination of display modules varies depending on the application and
requirements of the job.
RAX-1048TZ
Programmable Zone
LED Annunciator Module
IPS-2424
Programmable Input
Switches Module
Display Modules
FDX-008
Fan Damper Module
Each of these Display Modules occupy one display
position and mount to the display cutouts on the
following chassis:
FX-2017-12N
Mid-Size Main Chassis
FX-2009-12N
Large Main Chassis
ECX-0012
Expander Chassis for FX-2009-12
These modules can also be mounted in the standard
BB-5000 cutouts (with brackets), as well as in the
BB-1000 enclosures (requires RAX-LCD as a driver)
.
DSPL-420
Narrow Main
Display Module
DSPL-2440
RAXN-LCD
Network Remote LCD
Annunciator Module
Narrow Graphic
Display Module
RAXN-LCDG
Graphic Remote LCD
Annunciator Module
Summary of Contents for Flex-Net Phase II
