Mircom Flex-Net Phase II, Application Manual

Page: 57 / 132

56
Appendix B: Using the Configurator
Insert Menu
The Insert Menu contains the following commands.
Some commands may be disabled (greyed) depending on what items are selected on the user
interface.
Some items may be suppressed depending on the product.
Job Menu
The Job Menu contains the following commands:
Name Description
Add Network
Nodes
Nodes Add a network node to the job.
Add Loop
Controllers Add an Addressable or Conventional Loop Controller to the selected
network node.
Add
Annunciators
Add an LCD or LED Annunciator to the selected network node.
Add Display
Adder
Add a Display Adder to an Annunciator or Base Panel.
Add UDACT Add UDACT capability to the selected network node.
Context Dependent
Add Device If the selected tree item is a device loop, add a device or circuit.
Add Message
Add a Message if the selected tree item is a remote annunciator that can
accept Custom Messages.
Add
Correlations Launch a dialog that allows correlations to be added to the selected
devices or display items.
Name Short cut Description
New Job Ctrl-N
This command will open the Create Job dialog which will
allow you to start a new job. The new job can be based on a
supplied template or on an existing job.
Open Job Ctrl+O This command will open an existing job from your database.
Import Job
Imports a selected job/version from an external database or
serialized job archive and converts the job to the current
version if necessary.
Export Job Ctrl+E
Exports the current job in one of two formats: A single job
database file, or a compact, serialized archive format.
New Version Ctrl+W
Make a copy of the current job, assigning it the next highest
version number. The user is prompted for mandatory
comments and may also override the Author field. The Job
Name cannot be changed. The new version is un-locked for
editing.