80
Appendix B: Using the Configurator
Holidays
This dialog allows you to add and remove holiday definitions for use when a panel is
configured with the After Hours option.
Compose a new holiday definition in the YYYY MM DD edit boxes and press Add Holiday. You
can specify recurring holidays by using wild cards.
Enter 9999 for the year to specify that the holiday happens every year.
•
e.g. 9999 01 01 for New Years Day.
Enter 99 for a month or day to specify a recurring holiday.
•
e.g. 9999 99 01 to specify that the first of every month is a holiday.
•
e.g. 9999 07 99 to specify that the site is shut down for the whole of July for summer
vacations.
By default the holiday has a Duration of 1 day. Change this to specify a longer holiday.
•
e.g 9999-12-25 2 to specify a two day break beginning on December 25th.
Note: The program prevents you from entering duplicate holidays, but does not check for
"nested" holidays.
As holidays are added or removed, the list on the "parent" form is maintained to be in
agreement. An error message is displayed if the limit for the total number of holidays would be
exceeded.
Summary of Contents for Flex-Net Phase II
