Minolta Scanner Mode User Manual Download Page 40

Page: 40 / 314

Preparation

Scanner Mode

3-7

Touch [Network Set].

Specify the necessary
settings for the parameters
in the screen that appeared.

❍

For details on specifying
settings for the various
parameters, refer to the
following pages.

Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the Basics screen.

✎

Note

After changing the setting of a parameter marked with

, the copier

must be turned off, then on again.

✎

Note

The list of the settings specified for each function can be printed.

For details on printing the list of settings, refer to “Checking the
Settings For Each Function (Settings List)” on page 14-15.

Summary of Contents for Scanner Mode



























































































































































































































































































































Search results

Summary of Contents for Scanner Mode

Reviews:

Brands by name

Popular brands

Minolta Scanner Mode, User Manual

Search results

Summary of Contents for Scanner Mode

Reviews:

Brands by name

Popular brands