Minolta Scanner Mode User Manual Download Page 249

Page: 249 / 314

Specifying Management Settings

13-30

Scanner Mode

Touch [Memory Lock On/
Off].

Touch the buttons for the
days that printing will be
stopped on.

Touch [Stop Time], and then use the keypad to type in the time for
printing to begin.

Touch [Start Time], and then use the keypad to type in the time for
printing to stop. Then, touch [Enter].

❍

To cancel the setting, touch [Cancel].

✎

Note

When specifying the time, be sure to select the days.

The time setting is common for all days. Different time periods
cannot be specified for different days.

Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the standby screen (initial screen).

Summary of Contents for Scanner Mode



























































































































































































































































































































Search results

Summary of Contents for Scanner Mode

Reviews:

Brands by name

Popular brands

Minolta Scanner Mode, User Manual

Search results

Summary of Contents for Scanner Mode

Reviews:

Brands by name

Popular brands