Minolta Scanner Mode User Manual Download Page 239

Page: 239 / 314

Specifying Management Settings

13-20

Scanner Mode

Specifying the setting

Touch [Admin. 1], and then touch [Account Reg].

Touch the button of the account whose settings you wish to specify.

Touch [Network Settings].

In the screen that appeared,
the following settings can be
specified.
These settings are specified
to prevent anonymous e-
mail from being sent.

❍

From e-mail address:
Type in the e-mail
address for the account.

❍

POP3 User name:
Type in the POP3 user
name for the account.

❍

POP3 Password: Type in the POP3 password for the account.

Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the Basics screen.

Summary of Contents for Scanner Mode



























































































































































































































































































































Search results

Summary of Contents for Scanner Mode

Reviews:

Brands by name

Popular brands

Minolta Scanner Mode, User Manual

Search results

Summary of Contents for Scanner Mode

Reviews:

Brands by name

Popular brands