manualshive.com logo in svg

Minolta Scanner Mode, User Manual

Share
Download
Minolta Scanner Mode User Manual Download Page 302

Troubleshooting

15

Scanner Mode

15-9

15.3

Troubleshooting

Remedies for several possible problems are described below.

Internet fax transmissions/Scan to E-mail transmissions

Problem

Cause

Remedy

Page 
referen
ce

Transmission 
is not possible.

The connections are incorrect.

Check the LED indicator on 
the hub and check the 
connections.

-

A user logged in with their 
account access code and tried 
to send data when no e-mail 
address is specified for that 
account.

Register an e-mail address for 
the account that is logged in.

p. 13-19

The settings necessary for the 
device are not registered.

Specify the necessary 
network settings.

p. 3-1

The LAN cable is damaged.

Replace the LAN cable.

-

Other causes

Touch the [Com.] button on 
the Job List screen to check 
the details of the transmission 
error, and then refer to the 
table of error codes.

p. 8-40, 
p. 15-3

Transmission 
is possible, but 
the image 
cannot be 
outputted at 
the recipient’s 
terminal or 
computer.

The recipient’s terminal is not 
able to handle the sent image.

Change the size, resolution 
and coding method so that 
they are supported by the 
recipient’s terminal, and then 
try sending the data again.

p. 3-13

The document text was not 
inserted when the data was 
sent.

With some e-mail 
applications, if an e-mail is 
received containing no text 
and only an attached file, it 
may not be possible to open 
the attached file. Therefore, 
text should be inserted into the 
document that is sent. 

p. 8-37

An interruption 
in the 
transmission 
was specified, 
but the 
transmission 
was not 
interrupted.

It takes some time to interrupt 
an Internet fax transmission.

Wait until the transmission is 
interrupted.

-

Summary of Contents for Scanner Mode



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands