Minolta Scanner Mode User Manual Download Page 34

Page: 34 / 314

Preparation

Scanner Mode

3-1

Preparation

3.1

LAN Connection

This copier can transmit with the TCP/IP protocol on a LAN. Therefore, the
LAN cable must be connected.

Connect to the LAN by using a LAN cable (cable for Fast Ethernet
100BASE-TX).

Connecting the LAN cable

Insert one plug on the LAN cable into the connector (marked LAN) at the
back of the machine, and then insert the other plug into the hub.

✎

Tip

The connector is at the back of the machine.

The LAN cable should be a cable for Fast Ethernet 100BASE-TX
(Category 5).

The LAN cable is not included as an accessory.

Connector for LAN cable

USB printer connector (optional)
• For more details, refer to the manual for

the Pi3505e printer controller.

Power cord connector

LAN USB

LED indicator

Summary of Contents for Scanner Mode



























































































































































































































































































































Search results

Summary of Contents for Scanner Mode

Reviews:

Brands by name

Popular brands

Minolta Scanner Mode, User Manual

Search results

Summary of Contents for Scanner Mode

Reviews:

Brands by name

Popular brands