Minolta Scanner Mode User Manual Download Page 282

Page: 282 / 314

Reports and lists

Scanner Mode

14-7

14.3

Checking the Registered One-Touch Keys (One-
Touch Key List)

The list of recipients registered as one-touch key can be outputted and
checked.

Precautions

Unregistered one-touch keys are not printed.

Outputting the one-touch key list

Press the [Utility] key.

Touch [Reports].

Touch [One-Touch List].

Touch [Enter].

The one-touch key list is
outputted.

✎

Tip

Even if [Enter] is not
touched, the report is
automatically outputted.

Summary of Contents for Scanner Mode



























































































































































































































































































































Search results

Summary of Contents for Scanner Mode

Reviews:

Related manuals for Scanner Mode

Brands by name

Popular brands

Minolta Scanner Mode, User Manual

Search results

Summary of Contents for Scanner Mode

Reviews:

Related manuals for Scanner Mode

Brands by name

Popular brands