Minolta MAGICOLOR 3300, User Manual

Page: 155 / 194

Tray Cover
147
c
Align this indicator mark with the pin 1 notch or printed label on the
controller board.
d
Gently press down on the time-of-day clock until it’s firmly seated.
4
Reinstall the controller board.
Gently slide the controller board into the printer’s tracks until it is fully
seated, and then tighten the screws.
5
Reconnect all interface cables.
6
Reconnect the power cord and turn on the printer.
In compliance with UL guidelines, “The appliance inlet is
considered to be the main disconnect device.”
The presence of the clock will be automatically sensed.
7
Print a startup page.
The time-of-day clock is not listed under “Installed Options” on the startup
page, but the time does appear as System Date in the Printer Information
column.
For instructions about setting the time-of-day clock, refer to the CrownBooks.
Tray Cover
The tray cover accessory protects the media
tray(s) from dust.
Installation
1
Hook the tray cover onto the tabs on
the rear of the printer.