Minolta MAGICOLOR 3300, User Manual

Page: 78 / 194

Replacing the Fuser Unit 70
1
Pull the media tray out of the printer
until it stops.
2
Hold the tray with both hands, lifting
slightly, and remove it from the printer.
Push the tabs of the media feed roller cover to open the cover.
3
Lift the clip at the end of the media
feed rollers
, and remove the
media feed rollers .
4
Align the new media feed rollers’ axis with the shaft in the media tray as
illustrated and slide the shaft through the roller until the clip locks into the
groove at the end of the shaft.
5
Close the media feed rollers cover .