Minolta MAGICOLOR 3300, User Manual

Page: 184 / 194

Warranty Considerations 176
Since radiation emitted inside the printer is completely confined within protec-
tive housings and external covers, the laser beam cannot escape from the
machine during any phase of user operation.
International Notices
Power Cord
The following power cord requirements are in effect for your 220 V printer.
Voltage
Attention Norwegian users: This equipment is designed to operate within
an IT power system where the line-to-line voltage does not exceed 240 V.
Lithium Batteries
Attention Swiss users: Lithium batteries need to be disposed of in
accordance with Annex 4.1 of SR814.013.
Warranty Considerations
Various factors can affect a printer’s warranty, such as electrostatic damage,
unsupported consumables, and other actions listed on the following page.
Read your printer warranty carefully. For information about your warranty, go
to www.minolta-qms.com/support, then click on the Answer Base.
If MINOLTA-QMS printer failure or damage is found to be directly attributable
to the use of non-MINOLTA-QMS approved consumables, print media, and/or
accessories, MINOLTA-QMS will not repair the printer free of charge. In this
case, standard time and material charges will be applied to service your
printer for that particular failure or damage.
Minimum
0.75 mm
2
Minimum H05 VV - F
The male plug is certified in the country in which the equipment is to be
installed, and the female plug is an IEC 320 connector.