Minolta MAGICOLOR 3300, User Manual

Page: 142 / 194

Duplex Kit (Americas Only) 134
9
Reconnect the power cord, and turn on the printer (a startup page should
print, if enabled).
In compliance with UL guidelines, “The appliance inlet is
considered to be the main disconnect device.”
10
Verify that the total size of the RAM installed in your printer is listed on the
startup page (control panel’s Administration/Startup Options/Do Start
Page menu) or a status page (control panel’s Print Status ? button or
Administration/Special Pages/Print Status menu).
Duplex Kit (Americas Only)
The duplex kit (designed for the magicolor 3300 EN) consists of a custom
integrated curcuit chip, which provides duplex printing and time-of-day clock
capability. Follow the instructions in “Time-of-Day Clock” on page 145 to
install integrated circuit chip.
Emulations, Fonts, and Other Software
Emulations
CGM is available as an optional emulation. This section describes how to
download an emulation to the printer’s hard disk.
You must have at least one hard disk, internal or external, attached to
the printer in order to use an optional emulation. If more than one hard
disk is available, the emulation automatically installs itself on the disk
with the most free storage space. MINOLTA-QMS recommends that
you have at least 4 MB of memory above the base configuration and
that you add at least 1 MB memory for each emulation installed. This
ensures that the printer can run the emulation without slowing down
performance.
Downloading an Emulation via PageScope Net Care
MINOLTA PageScope is a utility which provides access to printer manage-
ment functions, including status monitoring and network/printer parameter
settings. We recommend that you use PageScope to download an emulation.
Refer to the PageScope online help on the Software Utilities CD-ROM for
instructions about downloading applets for telnet and ftp.