Minolta MAGICOLOR 3300, User Manual

Page: 127 / 194

Status, Error, and Service Messages
119
IMAGING UNIT
LIFE LOW
The imaging unit life is
low. Replace the imaging
unit. The imaging unit
will automatically reset
its consumables count.
IMAGING UNIT
MISSING
The imaging unit is
missing. Make sure that the
imaging unit is correctly
installed.
INITIALIZING
The printer is initializing. Wait. No other action
needed.
The printer is warming
up and getting ready to
go on line. Wait. No other action
needed.
INVALID < X >
The item
< X >
is not
valid, such as disk
selected or paper
information.
Make sure you are
inputting or choosing
the valid information or
value.
INVALID ID < X >
The printer has detected
a nongenuine
MINOLTA-QMS
consumable (toner
cartridge, fuser unit, or
imaging unit). To resume printing and
to prevent permanent
damage to your
MINOLTA-QMS printer,
replace the consumable
with a genuine
MINOLTA-QMS
consumable. If you are
using a genuine
MINOLTA-QMS
consumable and still
receive this error,
contact Support. Refer
to the Service & Support
Guide or check
www.minolta-qms.com/
support.
This message... means... do this...