Minolta MAGICOLOR 3300, User Manual

Page: 40 / 194

Loading Media 32
1
Slide open the media tray until it
stops.
2
Using two hands, lift it slightly to
remove it from the printer and place
it on a flat surface.
3
Remove any media remaining in
the tray.
4
If necessary, adjust the two side media guides and the end media guide to
the proper positions.
Attention
The end media guide must be in direct alignment with the media size
mark in the bottom of the media tray. If the guide is not in the proper
hole, automatic paper size detection will not work.