Minolta MAGICOLOR 3300, User Manual

Page: 74 / 194

Replacing the Imaging Unit 66
9
Remove the black protective sheet
and dispose of it.
Attention
Do not touch black transfer rollers.
They are extremely sensitive to
hand oils and scratches, both of
which reduce print quality. This
type of damage is not covered by
the product warranty.
10
Close the covers , .
11
Turn on the printer.
You do not need to reset the con-
sumables usage monitoring sys-
tem when you replace an
imaging unit.
After approximately 6 minutes warmup (assuming normal temperature
and humidity), your printer prints a startup page and displays “
IDLE
” on
the message window.
This 6-minute warmup happens only when a new imaging unit has been
installed. Normal warmup time when the printer is turned on is approximately
1.5 minutes.