Minolta MAGICOLOR 3300, User Manual

Page: 185 / 194

Warranty Considerations
177
Attention
Don’t return any merchandise to the manufacturer without calling for a
Return Merchandise Authorization (RMA) number (Americas only).
Refer to the Service & Support Guide or www.minolta-qms.com for the
Technical Support telephone number where you can obtain an RMA
number. If the RMA number is not prominently visible on the outside of
items returned, MINOLTA-QMS will not accept receipt.
These Actions Will Result in Voiding Your Warranty
Print Media Use of nonsupported transparency (OHP) media,
such as coated color transparencies.
Use of other nonsupported print media, such as ink
jet paper.
See chapter 2, “Using Media,” in the User’s Guide for
information about media. Check www.minolta-qms.com/
support (click on Answer Base) for currently approved
media. To order approved transparency media, go to
www.q-shop.com.
Electrostatic
Discharge Failure to protect the printer controller board and any
associated daughterboard or module from electrostatic
discharge or damage while performing any task involving
the controller board.
Instructions Failure to follow instructions in the printer documentation.
Modifications Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for
compliance to Federal Regulations could void your
authority to operate this product within the Laws and
Regulations of the Federal Communications Commission.
Consumables Use of consumables not manufactured or supported by
MINOLTA-QMS. Any damage to the printer or quality
problems caused by a refilled toner cartridge use.
Imaging Unit or
Transfer Roller Any damage resulting from mishandling the imaging unit
(including its four OPCs) or the transfer roller.
Accessories Use of accessories not manufactured/supported by
MINOLTA-QMS.