Minolta Di620, Manual, Page: 96 / 466

M-77
1155SBM1208A
12-8. 3rd Drawer Paper Empty Detection
Main Tray
●
A paper-empty condition of the Main Tray is detected by 3rd Drawer Main Tray
Paper Empty Board and 3rd Drawer Paper Empty Sensor.
●
3rd Drawer Main Tray Paper Empty Board detects a paper-empty condition at a tim-
ing when the 3rd Drawer is slid into the copier (i.e., when the Main Tray is at its
lower limit position). The copier notes a paper-empty condition if the 3rd Drawer
Main Tray Paper Empty Board is unblocked ( ).
●
3rd Drawer Paper Empty Sensor works when paper is taken up from the Main Tray
(i.e., when the Main Tray is at its upper limit position). The copier considers that the
Main Tray has run out of paper if the 3rd Drawer Paper Empty Sensor is unblocked
( ).
Shift Tray
●
A paper-empty condition of the Shift Tray is detected by 3rd Drawer Shift Tray Paper
Empty Sensor.
●
The copier considers that the Shift Tray has run out of paper when 3rd Drawer Shift
Tray Paper Empty Sensor is unblocked ( ).
<Copying Operation at Main/Shift Tray Paper Empty>
* When a paper-empty condition is detected in the Main Tray during a multi copy
cycle, the paper stack on the Shift Tray, if available, is transferred to the Main Tray to
continue the copy cycle. If paper is not loaded on the Shift Tray but paper of the
same size and direction is loaded in any other paper source, that paper source is
automatically selected for an uninterrupted copy cycle.
* When a paper-empty condition is detected in both the Main and Shift Tray during a
multi copy cycle, and if no paper of the same size and direction is available, a paper-
empty message is given on the Touch Panel and the copy cycle is terminated.
H
H
H
3rd Drawer Shift Tray Paper
Empty Sensor (PC31)
3rd Drawer Main
Tray Paper Empty
Board (PWB-E)
3rd Drawer Paper Empty Sensor (PC50)
4425M120AA