Minolta Di620, Manual, Page: 209 / 466

S-54
Tech. Rep. Mode Adjust
<IR>
<EDH>
Touch Panel Display
Setting (The default is .)
Fusing (°C) Input Set the temperature for fusing temperature control of the printer.
Image Density Set the image density for the printer.
ATDC Control Current: Displays the current ATDC control voltage.
Set: Set the ATDC control voltage.
Note: If the value for “Set” is to be changed, be sure to record the current
setting value.
Touch Panel Display
Setting (The default is .)
Zoom (CD) Set the correction value for the zoom ratio in the CD direction.
Zoom (CD) Manual Set the correction value for the zoom ratio in the FD direction.
Scale (FD) Set the correction value for the Original Length Scale position in the FD
direction (scanning position).
Scale (CD) Set the correction value for the Original Width Scale position in the CD
direction (scanning position).
Exp. Lamp Adjust Set the intensity regulating level of the Exposure Lamp.
Note: This function is only for factory setting and should never be used in
the field.
Exp. Lamp address Set the starting address for light intensity monitoring.
Note: This function is only for factory setting and should never be used in
the field.
Touch Panel Display
Setting (The default is .)
Zoom (FD) EDH Set the correction value for the zoom ratio in the FD direction when the
EDH is used.
▼
Highlighted
3 2 1
195°C 190°C 180°C
(
−
3 to +3) (0)
(0 to 9.4) (7V)
Highlighted
0.990 1.000 1.010
(Smaller) (Greater)
0.990 1.000 1.010
(Smaller) (Greater)
(
−
7.0 to +7.0) (0.0)
(
−
12.0 to +12.0) (0.0)
(48 to 100)
(376 to 4920) (2640)
Highlighted
(0.980 to 1.020) (1.000)