Minolta Di620, Manual, Page: 336 / 466

D-25
14) Removal of the 3rd Drawer
1155D025AA
8. Remove four screws and the Guide Plate.
1075D034AA
9. Remove the Paper Separator Roll pressure spring.
10. Remove the C-clip and Paper Separator Assy.
1075D035AA
11. Remove the C-clip, slide the bushing off, and remove the
Paper Separator Roll Assy.
1075D005AA
1. Press the Paper Descent Key and slide the 3rd Drawer out
to the front.
* If pressing the Paper Descent Key does not allow you to
slide out the 3rd Drawer, insert a screwdriver or similar ob-
ject through the hole in the Rear Lower Cover and unlock
the drawer.
1155D026AA
2. Remove four screws on the Slide Rails and pull the 3rd
Drawer out to the front.
3. Unplug one connector, loosen two thumbscrews to remove
the Connector Board Assy, and remove the 3rd Drawer.
During steps 2 and 3, use care not to let the 3rd Drawer
fall off the Slide Rails.
NOTE