Minolta Di620, Manual, Page: 16 / 466

G-11
1155SBG0400A
To ensure that the copier is used in an optimum condition, observe the following
precautions.
●
Never place a heavy object on the copier or subject the copier to shocks.
●
Insert the power plug all the way into the outlet.
●
Do not attempt to remove any panel or cover which is secured while the copier is
making copies.
●
Do not turn OFF the Power Switch while the copier is making copies.
●
Provide good ventilation when making a large number of copies continuously.
● Never use flammable sprays near the copier.
●
If the copier becomes inordinately hot or produces abnormal noise, turn it OFF
and unplug it.
●
Do not turn ON the Power Switch at the same time when you plug the power cord
into the outlet.
●
When unplugging the power cord, do not pull on the cord; hold the plug and pull
it out.
●
Do not bring any magnetized object near the copier.
●
Do not place a vase or vessel containing water on the copier.
●
Be sure to turn OFF the Power Switch at the end of the workday or upon power
failure.
●
Use care not to drop paper clips, staples, or other small pieces of metal into the
copier.
■
Operating Environment
The operating environmental requirements of the copier are as follows.
•
Temperature: 10°C to 32°C with a fluctuation of 10°C per hour
•
Humidity: 15% to 85% RH with a fluctuation of 10% RH per hour
■
Power Requirements
The power source voltage requirements are as follows.
•
Voltage Fluctuation: AC115/120/127/220-240V
±10% (Copying performance assured)
+6%, –10% (AC127V Areas only)
–15% (Paper feeding performance assured)
•
Frequency Fluctuation: 50/60 Hz ±0.3%
4 PRECAUTIONS FOR USE