Minolta Di620, Manual, Page: 185 / 466

S-30
Tech. Rep. Mode Tech. Rep. Choice
<Printer>
Touch Panel Display
Setting (The default is .)
Simplex / Duplex?
Select whether or not to enable the setting of 1-Sided 1-Sided under Orig-
inal Copy Default available from User’s Choice.
Note: If “Both” is selected, 1-Sided 1-Sided becomes available as an
option.
Universal Tray Set the size in the CD direction of the inch paper used in the Universal Tray if
its size in the FD direction is 14”.
Touch Panel Display
Setting (The default is .)
Toner Empty Stop Select whether or not to inhibit copying when a toner-empty condition is
detected.
T/C Abnormal Select whether to enable or disable copying when an abnormal T/C is
detected.
Note: As a rule, the setting should not be changed.
Lead Edge Erase Set the erase width on the leading edge of the image.
Note: The press of the Start key lets the copier output a test pattern (grid pat-
tern). The paper source is the Universal Tray.
Trail Edge Erase Set the erase width on the trailing edge of the image.
Note: The press of the Start key lets the copier output a test pattern (grid pat-
tern). The paper source is the Universal Tray.
Loop Adjustment Set the length of loop to be formed between the Synchronizing Rollers.
γ
Table Specify the gamma (
γ
) table (gradation characteristics) in the Photo mode.
▼
Highlighted
▼
▼
▼
Both
Does not limit the options for
Original Copy Default to
2-sided copying only.
▼
Duplex Only
Limits the options for Origi-
nal Copy Default to 2-
sided copying only.
▼
Display
Description
14 x 81/4 14 x 81/2
Highlighted
Enable Disable
Enable Disable
(0 to 5) (4mm)
(0 to 5) (3mm)
Description
Loop length approx.
−
3mm
Loop length approx.
−
1mm
Loop length approx. 1mm
Loop length approx. 3mm
Description
Loop length approx. 5mm
Loop length approx. 7mm
Loop length approx. 9mm
Display
−
3
−
2
−
1
0
Display
1
2
3
(0 to 9) (4)