Minolta Di620, Manual, Page: 232 / 466

T-18
<Multi Bypass Misfeed Clearing Procedure>
Symptom Step Check Item Result Action
Paper is not
taken up at all. 1 Does the paper being used meet
product specifications? NO Instruct the user to use the
paper that meets product
specifications.
2 Is the paper curled, wavy, or damp? YES Change the paper. Instruct
the user on the storage of
paper.
3 Are the pressure pad and guide plate
dirty or deformed? YES Clean or change the pres-
sure pad or guide plate.
4 Are the Manual Feed Paper Take-Up
Rolls deformed, worn, or dirty with
paper dust? YES Clean or change the Manual
Feed Paper Take-Up Rolls.
5 Check CL1 for operation.
Does the voltage across PJ2A-2B on
PWB-A and GND change from
DC24V to DC0V when the Start key is
pressed after paper has been loaded
on the Multi Bypass Table? NO Change PWB-A.
6 Check SL1 for operation.
Does the voltage across PJ8A-2B on
PWB-A and GND change from
DC24V to DC0V when the Start key is
pressed after paper has been loaded
on the Multi Bypass Table? NO Change PWB-A.
7 Is PC6 fully operational?
Make the input port check using “I/O
Check.” YES Change CL1, SL1, or PWB-
A.
NO Check the PC6 actuator for
operation and, if it is okay,
change PC6.