Minolta Di620, Manual, Page: 162 / 466

S-7
1155SBS0304A
3-4. PHC Board
Symbol Name Description
DIPSW1-6
DIPSW1-7
DIPSW1-8 Used when making factory checks.
Note 1: NEVER use these switches in the field.
Note 2: Initial settings are “OFF” for all.
SW1
Memory Board CPU
Reset Switch
Used to reset the CPU on the Memory Board.
LED1 Operation Check LED
Starts blinking at 0.5-second intervals when the Power
Switch is turned ON.
LED2 Operation Check LED Lights up when the system is ready for operation.
LED3
Compression Check LED
(including reading)
Lit up during compression.
LED4
Expansion Check LED
(including printing)
Lit up during expansion.
LED5 Fatal Error Check LED Lights up when an error that is categorized as “fatal” occurs.
LED6 Error Check LED
Lights up when an error that is categorized as an “ordinary”
error occurs.
LED7 Caution Check LED
Lights up when a condition that is categorized as a “caution”
occurs.
LED8 Attention Check LED
Lights up when a condition that is categorized as “attention”
occurs.
LED9 Power Check LED Lights up when power is supplied to the Memory Board.
LED10 Reset Check LED Lights up when the Memory Board is reset.
Factory Check
Switches
1155S015AC