Minolta Di620, Manual, Page: 201 / 466

S-46
Tech. Rep. Mode RD Mode
Touch Panel Display
Setting (The default is .)
RD Mode
Copy Track Used to make the initial settings and various transmissions.
DT Setting Enter the following data.
CT-ID Enter the 4-digit ID number of the Center which has been programmed in
the Center personal computer.
DT-ID Enter the 6-digit ID number of the Data Terminal.
TEL No. Enter the 19-or-less-digit phone number of the modem connected to the
Center personal computer.
Note 1: When the office extension and outside line use different systems,
enter “P” for a “pulse” telephone line or “T” for a “tone” telephone
line before the outside line number.
Note 2: The time it takes the private branch exchange (PBX) system to
switch from the extension line to the outside line varies depending
on the type of PBX system used.
Set this time as follows.
Fixed switching time: Enter the pause code “-” (a single “-” lasts 2
sec.)
Varying switching time: Enter the wait code “W”.
Initial Transmission Used to perform the initial transmission from the PPC to the Center to
check for correct communication when the Data Terminal has been set up.
RAM Clear Reinitializes the Data Terminal.
Common DT Set the following functions.
Dial Mode Select the type of telephone line of the user.
Auto Receive Choose “Yes” or “No” for the auto reception function.
Note: Select “Yes” if the line is dedicated to the Data Terminal.
Result Code Enter the result code for connection to the modem when the line is con-
nected. (0 to 9999)
Report Format Japan only.
▼
Highlighted
YES NO
Tone Pulse
YES NO
10 Bit 11 Bit