Minolta Di620, Manual, Page: 187 / 466

S-32
1155SBS050403A
3) System Input
•
This function allows the Tech. Rep. to change the fixed zoom ratios, set the paper size, define the
marketing area, configure for the Key Counter, and input the telephone number.
<Setting Procedure>
1. Touch [System Input] to open the System Input menu screen.
2. Touch the desired subfunction key.
Tech. Rep. Mode System Input
Touch Panel Display
Setting (The default is .)
Change Fixed Zoom Change a fixed zoom ratio to a desired value in the range between X0.250
and X4.000.
<Procedure>
1. Touch the key of the fixed zoom ratio to be changed.
2. Press the Clear key to clear the setting and enter the new ratio from the
10-Key Pad.
3. Touch [Enter] to validate the new setting.
Paper Size Input Set the size of the paper used in each paper source.
<Procedure>
1. Touch the key of the paper source for which the paper size setting is to
be changed to show the Paper Size Input 2 screen.
2. Touch the desired paper size key.
Note: If the 10-Key Pad has been selected, enter the FD and CD size of
the paper from the 10-Key Pad.
3. Touch [End] to validate the paper size setting.
Marketing Area Select the marketing area to set the paper size and fixed zoom ratios.
<Procedure>
1. Touch the desired marketing area key.
2. Touch [End] to validate the marketing area setting.
Tel. # Input Input the telephone number that will appear on the Touch Panel when a
malfunction occurs in the copier.
<Procedure>
1. Enter the phone number (consisting of up to 19 digits) from the 10-key
Pad.
Note: Use the Interrupt key to enter a hyphen “-”.
2. Touch “OK” to validate the phone number setting.
CH Wire Cleaning Select whether or not to run an automatic cleaning sequence of each
corona wire when the Power Switch is turned ON.
▼
Highlighted
MJ MH MC Others
ON OFF