Minolta Di620, Manual, Page: 17 / 466

G-12
1155SBG0500A
Before using any consumables, always read the label on its container carefully.
●
Use the right toner. The applicable copier model name is indicated on the Toner
Bottle.
●
Paper can to be easily damaged by dampness. To prevent absorption of mois-
ture, store paper, which has been removed from its wrapper but not loaded into
the Drawer, in a sealed plastic bag in a cool, dark place.
●
Keep consumables out of the reach of children.
●
Do not touch the PC Drum with bare hands.
● Store the paper, toner, and other consumables in a place free from direct sunlight
and away from any heating apparatus.
●
The same sized paper is of two kinds, short grain and long grain. Short grain
paper should only be fed through the copier crosswise, long grain paper should
only be fed lengthwise.
●
If your hands become soiled with toner, wash them with soap and water immedi-
ately.
●
Do not throw away any used consumables (PC Drum, starter, toner, etc.). They
are to be collected.
NOTE
Do not burn, bury in the ground, or throw into the water any consumables (PC
Drum, starter, toner, etc.).
1155SBG0600A
The Printerhead of this copier uses a laser diode that emits a laser beam. Use the
following precautions when performing service jobs at the users’ premises.
● When a service job needs to be performed in the laser beam path, such as when
working around the printerhead and PC Drum, be sure first to turn the copier
OFF.
●
If the job requires that the power cord be left plugged in, observe the following
precautions.
•
Take off your watch, ring, and any other reflective object and wear laser protec-
tive goggles.
•
At the job site, select a place that is as far as possible away from the users and
that is enclosed by walls.
•
Do not bring a highly reflective tool into the laser beam path during the service
job.
5 HANDLING OF THE CONSUMABLES
6 OTHER PRECAUTIONS