Minolta Di620, Manual, Page: 191 / 466

S-36
Tech. Rep. Mode Counter
Touch Panel Display Operation
PM <PM Counter 3/4>
<PM Counter 4/4>
<Clearing a Count>
Touch the item key (Manual Feed, 1st Drawer, ...) whose count is to be
cleared and then press the Clear key. If a count is accidentally cleared,
pressing the Interrupt key will undo the clear operation.
Consumables 1) This function allows the Tech. Rep. to set the number of copies to be
made before the next replacement time.
2) It shows the current count value and the above setting. Each counter
may be reset to 0 independently of each other.
3) When the count reaches the preset value, the Maintenance Call
reminder (Web: M2; Waste Toner: M3) is given.
Note 1: When “Call Indicated” is selected for “Maintenance Call” available
from Tech. Rep. Choice.
Note 2: The copier inhibits the initiation of a new copy cycle when 20k
more copies have been made after the Maintenance Call
reminder.
<Setting a Count>
1. Touch [Set] and then press the Clear key to clear the count. If the count
is accidentally cleared, pressing the Interrupt key will undo the clear
operation.
2. Enter the desired value from the 10-Key Pad.
<Clearing a Count>
Touch [Count] and then press the Clear key to clear the count. If the count
is accidentally cleared, pressing the Interrupt key will undo the clear opera-
tion.
▼
Display Description
Developer 1
Developer 2
Other PM Parts 1
Other PM Parts 2
Cleaning 1
Cleaning 2
Cleaning 3
Time over which the PC Drum has turned (H), the
number of sheets of paper as converted from the
time (K)
Time over which the PC Drum has turned (H), the
number of sheets of paper as converted from the
time (K)
No. of print cycles run
No. of print cycles run
No. of times a sheet of paper is fed out
No. of times a sheet of paper is fed out
No. of times a sheet of paper is fed out
Display Description
Fusing Unit
Fusing Roller
IR
EDH Simplex
EDH Duplex
EDH Single Feed
Fold
No. of times a sheet of paper is fed out
No. of times a sheet of paper is fed out
No. of scan motions
No. of times a 1-sided original is fed through
No. of times a 2-sided original is fed through
No. of single feeds
No. of times the Finisher makes a fold