Minebea CSD-401, Instruction Manual, Page: 9 / 150

VII
Division History
Date Manual No. Revised reason (Contents)
2011/09 DRW. No.EN294-1366 First edition ROM Ver. 1.000
2014/01 DRW. No.EN294-1366-A
Due to ECN NO.FN13-02192-A
-Change-
12-3-6.Data format in Command mode
Change ‘[OL] is appeared on the load data section at overload
application. [-OL] is appeared on the load data section at the
condition of gross value is minus.’ to ‘At the overload, [OL] is
output as a load data. When the gross value is less than -20D,
[-OL] is output also.’
12-4-6.Data format of Command mode
Change ‘When the overload is occurred, [OL] shall be shown
on the Load data section. [-OL] will be shown on the load data
section when the value is minus totally.’ to ‘At the overload, [OL]
is output as a load data. When the gross value is less than
-20D, [-OL] is output also.
13-1-5.Scaling of analog output
Change -1 display to -20D display. 110 % of
maximum display to +9D of the maximum display.
Delete ‘When the set value for CF-03 is set as [2], the BCD
output will become the data over condition when the Gross
weight is minus value. (in the case of suiting the instrument to
JIS standard.)