Minebea CSD-401, Instruction Manual, Page: 53 / 150

37
5-2. Contents table of C-function
Item C-Function No. Setting value Contents
Display position of decimal
point.
CF-01
*0 No decimal point
1 1234.5
2 123.45
3 12.345
Condition of over display CF-03
0
Bigger than |The maximum
capacity
＋
9D|
1
Exceeding to the maximum
capacity
±
110 %
*2
Smaller than -20D and larger than
maximum capacity
＋ 9D
Unit
(Unit setting at RS
corresponding output)
CF-05
*0 No unit
1 G
2 Kg
3 T
4 Lb
Operating condition of
zero set
CF-10
*0 Operation when it is steady
1 Operation by unconditional
Effective range of zero set CF-11
*0
±
2 % of the maximum capacity
1 ± 10 % of the maximum capacity
Target of zero tracking CF-12
0 Gross value and net value
*1 Gross value
Data width of zero tracking CF-13
00 ~ 99
Unit : 0.5 D
00 : Zero tracking OFF
*01
Time width of zero
tracking
CF-14
0 ~ 9
Unit : 0.5 s
0 : Zero tracking OFF
*2
Operation of power on
zero
CF-15
*0 Effective
1 Invalidity
Operating condition of tare
weight cancellation
CF-16
*0 Operation when it is steady
1 Operation by unconditional
Setting the storing
memory of the setting data
CF-17
00 ~ 11
0: store in RAM
1: store in EEPROM
10: zero set data
10: tare data
*00
Method of setting gravity
acceleration
compensation
CF-25
*0 Set the district number
1
Set a numeric value for gravity
acceleration.
District number of using
place
CF-26
(Possible to set at CF25 ＝ 0)
01 ~ 16
Unit District
*10
District number of
calibration place
CF-27
(Possible to set at CF25 ＝ 0)
01 ~ 16
Unit :District
*10
Gravity acceleration value
setting of using place
CF-28
(Possible to set at CF25
＝
1)
9.000 ~ 9.999
*9.797
Unit : m/s2
* : Set as default