Minebea CSD-401, Instruction Manual, Page: 46 / 150

30
4-7-2. Setting of the digital linearization
By pressing key twice from
display, comes → by pressing key, please
select the numbers of points which wants to compensate
linearization, and press key.
: compensation by 1 point
: compensation by 2 point
: compensation by 3 point
Please put the weight of the point which should be the
compensation after the display becomes
on the measuring section and press key.
As the measuring value blinks, press key after
confirming the STAB. mark lighting on.
As the 10
0
digit of the measuring value blinks, set the same
value with the weights put on the measuring section.
: Increase the measuring value.
: Decrease the measuring value.
: The displayed value is memorized, and
proceed to the next step.
: The setting is interrupted, and return to the
display of .
The display becomes when is
selected, and please execute the compensation of the second
point.
Additionally, the display becomes when
is selected, and please execute the
compensation of the third point. Make the value of weight as
< < .
Put an actual
weight
Confirm the
‘STAB’ mark
lights on.
When P-1
is selected
When P-2 is
selected.
to Next page
to Next page
[B]
Put the actual
weight.