Minebea CSD-401, Instruction Manual, Page: 17 / 150

1
1. Name and function of each part
1-1. Front panel
(1) Unit seal sticking place
Stick the attached unit seal as necessary.
(2) Load display section
Display the GROSS/ NET, over, error. When the various setting, display the setting value and the
status display.
(3) Status display
Display the status of CSD-401.
STAB. Flickering when the measurement data is stable.
TARE Flickering when executing the preset tare.
GROSS Flickering when the load display is GROSS weight.
NET Flickering when the load display is NET weight.
ZERO Flickering when the load value of GROSS weight or NET weight is zero and scale
interval is within ± 1/4.
HOLD Flickering when the external hold signal input is ON.
(4) Judgement display
Compared results (S1 to S5) by comparator function can be displayed.
S1
Display the S1 compared result.
S2 Display the S2 compared result.
S3 Display the S3 compared result.
S4 Display the S4 compared result.
S5 Display the S5 compared result.
(5) Key
ON/OFF the display.
Electricity is generally supplying in internal indicator and measuring section even the display is OFF.
Status standby when the display is OFF
(6) Key
Reset the each mode status before setting.
(7) Key
Executing the preset tare, or carry the figure when setting the value.
(1) Unit seal sticking
(2) Load display
(4) Judgement
(3) Status
(5) ON/OFF
(6) SET Key
(7) TARE Key (10) PRINT Key
(9) Zero key
(8) Net / Gross key