Minebea CSD-401, Instruction Manual, Page: 89 / 150

73
11-4-4. Setting of various set values (Target value, Fall, Pre-set value, Near zero, Over, Under)

The setting of the target value, fall, pre-set value, near zero, over and under becomes effective only when the
function F-20 is set in [7] (weigh-in mode) and [8] (weigh-out mode).
By pressing key from the normal measurement
mode, it enters into the stand-by condition
When key is pressed with pressing key,
is displayed
As the target value memorized at present is displayed when
key is pressed, please set the target value by using the
following keys.
: Change the value of the changed digit
: Select the changed digit
: Change the displayed value to [0]
: Setting is interrupted, and return to
display.
: Memorize the displayed value and proceed to next
step.
: Setting is finished without changing all setting.
When key is pressed after the target value (SET0) is
set, is blinking displayed.
As the [FALL] (SET1) memorized at present is displayed
when key is pressed again, please set the fall similarly.
When key is pressed after setting the fall (SET1)
is blinking displayed.
As the [PRE-SET VALUE] (SET2) memorized at present is
displayed when key is pressed, please set the
[PRE-SET VALUE] similarly.
Measurement mode
Target value
FALL
PRE-SET
VALUE
Next page [A]
Next page [B]
＋