Minebea CSD-401, Instruction Manual, Page: 80 / 150

64
11-3-2. How to set a comparison value.

Setting of comparison value is valid only set in the function F-20 as [0] to [6] (simple comparison mode).
By pressing key from the normal measurement mode, it
enters into the stand-by condition.
When key is pressed with pressing key,
is displayed.
As the S1 setting value memorized at present is displayed
when key is pressed, set the S1 setting value by using
the following keys.
: Change the value of the changed digit
: Select the changed digit
: Change the displayed value to [0]
: Interrupt the setting and return to
display.
: Memorize the displayed value and proceed to next step.
: Setting is finished without changing all setting.
When key is pressed after the S1 setting value is set,
is blinking displayed. As the S2 setting
value memorized at present is displayed when key is
pressed, set the S1 setting value similarly.
When key is pressed after setting the S2 setting value
is blinking displayed.
As the S3 setting value memorized at present is displayed
when key is pressed, set the S1 setting value similarly.
Measurement
＋
Memorize a
set value
Memorize a
set value
Memorize a
set value
Next page [A]
Next page [B]