Minebea CSD-401, Instruction Manual, Page: 77 / 150

61
10-6. How to confirm the BCD output (When BCD output is equipped with.)
By pressing the key from display,
is displayed, and 100 digit blinks.
At this time, the same value as the display is output from the
BCD output.
The BCD output changes, too, when the display is changed
with a below mentioned keys.
: Change the value of changed digit.
: Select the changed digit.
: Finish the check mode.

When the BCD output is not installed, the BCD output is not confirmed.
10-7. How to confirm an analog output (When analog output is equipped with.)
By pressing key from
display, is displayed, and the
analog output of DC4 mA (DC0 V) is made.
At this time, when the under mentioned key is
operated, the analog output of DC 12 mA (DC5 V) is
output in display, and the
analog output of DC DC20 mA (DC10 V) is output in
.
, : Changeover each analog output.
: Finish the check mode

When the analog output is not installed, the confirmation of analog output is not executed.
How to confirm the ROM version
Stand-by condition