Minebea CSD-401, Instruction Manual, Page: 104 / 150

88
(3) Writing comparison data (Host -> CSD-401)
2 4 6 8 10 12 14
@ 0 0 H I . Terminator
Command No. Simple comparison mode Batch/discharge mode
HI S5 Writing Over
（
SET4
）
LO Not used. Writing Under （ SET5 ）
S0 S1 Writing Target value
（
SET0
）
S1 S2 Writing Free fall
（
SET1
）
S2 S3 Writing Preliminary （ SET2 ）
S3 S4 Writing Zero band （ SET3 ）
In normal operation
Return (CSD-401 -> Host)
2 4 6 8 10 12 14
@ 0 0 H I . Terminator

The set value is justified to the left.

Never add the decimal point.

The writing of comparison data is variable-length. The length can be set from 1 to 6.

The range of set value for Fixed tare value is more than [0] and less than [The range of the 1
st
]. Other than the
range of set value is -99 999 ~ 99 999.
(4) Reading out % value of unbalanced load
2 4 6
@ 0 0 M Z Terminator
Return (CSD-401 -> Host)
2 4 6 8 10 12
@ 0 0 + 0 0 0 0 1 2 3 4 Terminator
Command No. Operation
80 % value of unbalanced load of ID No.1
81 % value of unbalanced load of ID No.2
82 % value of unbalanced load of ID No.3
83 % value of unbalanced load of ID No.4
84 % value of unbalanced load of ID No.5
85 % value of unbalanced load of ID No.6
86 % value of unbalanced load of ID No.7
87 % value of unbalanced load of ID No.8
Command No.
Address
00 ~ 31
Sign
Set value
Command No.
Address
00 ~ 31
Sign
Set value
Address
00
～
31
Command No.
Address
00 ~ 31
Sign of unbalanced load
% data of unbalanced load