Minebea CSD-401, Instruction Manual, Page: 63 / 150

47
7. Function mode
Various functions become effective by setting the function data.
7-1. Setting method of the function mode
Move from the normal measurement mode to stand-by
condition by pressing key.
is displays by pressing key with
key, and enters into the function mode.
By pressing key, is displayed.
Select function number which you want to change.
: Change the value of changing digit.
: Select the changed digit.
: Change the display value into [0].
: Interrupt the setting and return to the
display.
: Memorize the display value and proceed to the next step.
: Finish the function mode.
Press key, and set the setting value of the selected
function number.
Press key. The setting contents is registered, and the
display panel displays the following registered function number.
Continue and select the selected function number when you
change setting of other function numbers.
If key is pressed after registration is completed,
it becomes display. Please set to the
stand-by condition by pressing key.
Measurement mode
Stand-by condition
＋
Completing
registration
Stand-by condition