7 Additional settings
Options
This is where you can configure the behaviour when DCO file is loaded from the SD card.
Loading a DCO file
The selected settings are stored in the parameter set. When a DCO file is loaded, the
current settings of the servo drive will be overwritten.
Transfer the parameter file after reset and power on
: Select this option if a parameter file is
to be loaded from the SD card into the servo drive automatically after every power on and
after every reset.
File selection
Use the two options
Newest parameter set file (date)
and
Parameter set file selection by
name
to specify the parameter file that is to be loaded from the microSD card.
File name
The DCO file stated here will not become effective unless the option
Parameter set file
selection by name
has been selected. The name of the DCO file to be loaded can be
stated. You can change all of the eight characters of the file name. The file extension
DCO, however, cannot be changed.
File name conventions
The system does not support any directories/subdirectories and file names must comply
with the 8.3 file name convention. Lowercase letters will be automatically converted
when they are entered.
"SD card >> servo" button
When all of the necessary settings have been made, click
SD card >> servo
to start the
loading process. After the completion of the loading process, the new setting will be
displayed in the field
File name
. The new parameter set is now stored in the servo drive
and the servo drive performs a reset.
The parameterisation program cannot check whether the file that has been specified
actually exists on the microSD card. The firmware of the servo drive will detect this once
the loading process is started. If the loading process is not successful, the
parameterisation program will display an error message and the firmware will issue error
29-x. Please contact the Technical Support team in this case.
Product manual BL 4000-C
Page 132 of 298
