FCM9002 USER MANUAL
76-02-095 Rev.B
Page 91 of 145
4.4.2 User SFP Port Configuration
The SFP port configuration defines the physical operating parameters for the
user SFP port on the rear of the unit.
The SFP port menu for when the SFP is in user mode is shown below:
Metrodata FCM9002 "FCM9002" Alarms: Major
SFP
State
Up
link status
Up
sfp type
1000BASE-SX
max spEed 1000M
Auto-negotiation
Enabled
negotiated
1000M/FD
sFP Management <menu>
Tagging and Priority
<menu>
L2CP management
<menu>
OAM
<menu>
link loss Fwding
Disabled
Counters
<display>
First CAPITAL - select item
<escape> - exit menu
4.4.2.1 State
The SFP Port State configuration item defines the administrative state of the port.
The port states may be:
UP
Port enabled, normal operation
DOWN
Port disabled, alarm handling disabled
It is best practice to set the SFP port to the DOWN state when it is not fitted, not
being used or has no flows defined, as it will then not generate link down traps or
show in the alarmed state.
4.4.2.2 Link Status
The Link Status displays the operational state of the SFP port.
4.4.2.3 SFP Type
The SFP type is read from the SFP module and displays the type of module
used.
