FCM9002 USER MANUAL
76-02-095 Rev.B
Page 94 of 145
4.4.2.8.1 Device Details
SFP modules include an EEPROM to identify the module capabilities and these
may be read using the SFP device details option. The information display is as
shown below:
Metrodata FCM9002 "" Alarms: Major
SFP Info
--------
Transmit
Status Type Vendor Part No. Wavelength
----------------------------------------------------------------------
Good 1000BASE-SX HG GENUINE MXPD-248S-F 850nm
SFP Diagnostic Info
-------------------
Diagnostic Current Alarm Threshold Warning Threshold
Item Status Value Unit High Low High Low
----------------------------------------------------------------------
Tx Power OK 8 dBm 8 8 8 8
Rx Power alarm -26 dBm 0 -17 -1 -15
Bias OK 4.2 mA 20.0 1.0 15.0 1.0
Temp OK 44 C 85 -5 80 0
Supply OK 3.28 V 3.60 3.0 3.50 3.10
<Esc> - exit, <Enter> - refresh
4.4.2.8.2 Notifications
The SFP notifications menu configures the actions for alarm and trap generation
when the disagnostic values exceed the alarm or warning threshold values.
Metrodata FCM9002 "FCM9002_Fibre" Alarms: none
NOTIFICATIONS
1 - Temp High Alarm & Warning
2 - Temp Low None
3 - Supply High None
4 - Supply Low None
5 - Bias High None
6 - Bias Low None
7 - Tx Power High None
8 - Tx Power Low None
9 - Rx Power High None
A - Rx Power Low Alarm & Warning
B - SFP Removed None
C - OTDR Fault None
First CAPITAL - select item
<escape> - exit menu
