FCM9002 USER MANUAL
76-02-095 Rev.B
Page 18 of 145
1.1 FCM9002 EDD
The FCM9002 is a compact unit as shown occupying half a shelf in a traditional
19inch rack. All connectors and LED status indicators are accessible from the
rear of the unit.
1.2 Safety
The FCM9002 must not be connected to cabling which would be required by
BS6701 to equipped with over voltage protection. The following ports on the
FCM9002 are designated SELV ( Safety Extra Low Voltage ) within the scope of
EN41003
Terminal Port 9 Way D-Type
LAN Port(s) RJ45 10/100/1000BaseT
SFP
These ports must only be connected to SELV ports on other equipment in
accordance with EN60950 clause 2.3
1.3 Electro Magnetic Compatibility
In order to ensure EMC compliance, all signal and data cables must be shielded
and use screened connector shells. The cable screens must be terminated to the
screened connector shell and not connected to any pins of the connector. Failure
to use the correct connectors may compromise EMC compliance.
