FCM9002 USER MANUAL
76-02-095 Rev.B
Page 69 of 145
4.2.7.1.4 Get Config
To load a configuration file that has been saved on the TFTP server use the Get
Config command. Enter the file name for the configuration file and it will then be
loaded, validated and stored in EEPROM. The system will then be rebooted with
the new configuration.
4.2.7.1.5 Put Config
To save the running configuration use the Put Config command to load the file
onto the tftp server. Enter the filename and perform the transfer.
4.2.7.2 Server Mode
The FCM9002 can also be operated in TFTP server mode by setting Mode to
server, as shown:
Metrodata FCM9002 "FCM9002_Right" Alarms: Major
TFTP
Mode Server
remote IP 192.168.0.100
Software file name software
Config. file name config
First CAPITAL - select item
<escape> - exit menu
