FCM9002 USER MANUAL
76-02-095 Rev.B
Page 36 of 145
4.1.3 Provider ID
The provider ID is used during zero touch configuration and is used to identify the
beacons that should be used when multiple beacons are present.
If the provider ID is left blank, the FCM9002 will listen for any beacon whatever
the provider ID, whilst if a value is entered, only beacons with a matching ID will
be used.
The provider ID is not cleared by a cold start, and must be cleared manually if
necessary.
The provider ID is a string of upto 16 characters.
4.1.4 Access Control
The access control menu configures the user access security parameters for the
unit. The Access Control Menu is shown below:
Metrodata FCM9002 "FCM9002_left" Alarms:
Major
ACCESS CONTROL
Password ********
'View' user Enabled
Super Me No
<menu>
First CAPITAL - select item
<escape> - exit menu
4.1.4.1 Setting the Local Password
The local password for the FCM9002 may be changed using the system menu.
The default password is “FCM9002”, however, for deployment a more secure
password may be required.
To change the unit password, select “Password” from the system menu. The
FCM9002 will display the following:
Enter new password
Password >
