FCM9002 USER MANUAL
76-02-095 Rev.B
Page 75 of 145
4.4.1 User LAN Port Configuration
When a LAN port is defined as a user port, the LAN port configuration defines the
physical operating parameters for the four 10/100/1000BaseT ports on the rear of
the unit. By default, LAN1 is the WAN/Network port and LAN2 is a user port.
The LAN port menu in user mode, is as shown below:
Metrodata FCM9002 "FCM9002" Alarms: Major
LAN2
State
Up
link status
Up
max spEed 1000M
max Duplex Full
Auto-negotiation
Enabled
negotiated
100M/FD
MDI/MDIX
Auto
Tagging & Priority
<menu>
L2CP Management
<menu>
OAM
<menu>
link loss Fwding
Disabled
Counters
<display>
First CAPITAL - select item
<escape> - exit menu
4.4.1.1 State
The LAN Port State configuration item defines the administrative state of the port.
The port states may be:
UP
Port enabled, normal operation
DOWN
Port disabled, alarm handling disabled
It is best practice to set ports to the DOWN state when they are not being used
and have no flows defined, as they will then not generate link down traps or show
in the alarmed state.
4.4.1.2 Link Status
The Link Status displays the operational state of the LAN port.
4.4.1.3 Speed
The Speed parameter has two meanings depending upon whether auto
negotiation is enabled or not.
