FCM9002 USER MANUAL
76-02-095 Rev.B
Page 70 of 145
4.2.7.2.1 Remote IP
The IP address is that of the remote client which will perform the transfer. In the
event that the client sits behind a NAT enabled firewall, the external IP address is
the one that must be configured.
4.2.7.2.2 Software File Name
This is the filename of a file that if downloaded, will be assumed to be a new
software load.
When this file is downloaded, the unit will verify the transfer and then program
the new firmware. Once upgraded the unit will restart automatically.
From a windows pc, the tftp transfer command would be as below
tftp –i device_ip_address put application_filename device_filename
4.2.7.2.3 Config File Name
This is the filename that will be uploaded/downloaded from the FCM9002 as a
configuration file. When a new configuration file is PUT onto the device, once
loaded the unit will automatically restart.
4.2.8 Ping
To provide connectivity checking capability the FCM9002 can generate ICMP
ping requests to a configured IP address.
Once the ping is running, the display is as below:
Metrodata FCM9002 "FCM9002_Right" Alarms: Major
Destination: 192.168.0.100
press any key to stop test
sending...okay, time=3.4ms
sending...okay, time=1.9ms
sending...okay, time=1.9ms
sending...okay, time=1.9ms
sending...okay, time=1.9ms
sending...okay, time=1.9ms
sending...okay, time=1.9ms
sending...okay, time=1.9ms
