FCM9002 USER MANUAL
76-02-095 Rev.B
Page 119 of 145
4.6.2.5 User Port
The FCM9002 has four copper user ports along with an SFP port. This config
item defines which of the 3 ports the user frames will ingress for this flow.
Options:
LAN1
LAN2
SFP
Note, the port that is allocated as WAN port will not appear in the list of available
user ports.
4.6.2.6 C-VLAN Allocation
Customer traffic may be tagged or untagged.
In S-Tag mode, the full range of VLAN ID’s ( 1-4095 ) are available per port,
however in the C-Tag mode the full range of VLAN’s are available for the unit,
such that each ID may only be allocated to one port.
If a flow is to pass untagged frames, the allocation should include ‘0’, to only
pass tagged frames exclude 0 from the list.
In C-Tag mode the untagged action is defined on a per port basis and may be set
to either
DISCARD
Add default Tag
This action is defined in the port traffic management menu.
