10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
67
Mellanox Technologies
join cluster automatically : yes
load balancing algorithm : active-active
hash table algorithm : infiniband
multicast ip address : 224.0.0.77
cluster id : 1
active node table
-------------------
pkey vlan master-s/n router-s/n router-prio if-name router name advertised ip
0x7fff 0 0x62880 0x62880 100 if0 sRB-20210G 192.168.2.2
0x112 112 0x62880 0x62880 100 CP1 sRB-20210G 12.11.11.11
0x75 75 0x62880 0x62880 100 net75 sRB-20210G 75.75.75.75
Command
Description
cluster
load-balance-algorithm set
[active-active,
master-standby]
Sets the load balancing algorithm [active-active,
master-standby].
The traffic can be balanced between the 10 GbEs
according to the load balancing algorithm.
Options: active-active, master-standby
Default: active-active
active-active means that all sRB-20210G
Gateways in the cluster transfer packets
master-standby means that only the Master
sRB-20210G in the Cluster transfers packets;
the others are in Standby mode
Example:
10G(config-cluster)# cluster load-balance-algorithm set
active-active
Expected results:
10G(config-cluster)# cluster show
cluster configuration
-----------------------
state : enable
loop prevention : full
priority : 100
join cluster automatically : yes
load balancing algorithm : active-active
hash table algorithm : infiniband
multicast ip address : 224.0.0.77
cluster id : 1
active node table
-------------------
pkey vlan master-s/n router-s/n router-prio if-name router name advertised ip
0x7fff 0 0x62880 0x62880 100 if0 sRB-20210G 192.168.2.2
0x112 112 0x62880 0x62880 100 CP1 sRB-20210G 12.11.11.11
0x75 75 0x62880 0x62880 100 net75 sRB-20210G 75.75.75.75
