Version 2.0
Device Information
42
Mellanox Technologies
4.5
Viewing sRB-20210G Temperature (Switch CLI only)
To view sRB-20210G temperature information:
You can only view the
sRB-20210G
temperature from the switch privileged mode by running a
rear show
command, as shown in the example below.
ISR2004-3200# rear show
sRB-20210G in slot #3: Temperature: 45C; HW Version: 004; Serial Number: CN3107001088
sLB-2024 in slot #4: Temperature: 42C; HW Version: A02; Serial Number: CN0108000865
This example shows that the temperature of the sRB-20210G is at 45C.
The system polls the temperature sensors and notifies if threshold exceeded.
sRG-20210G temperature thresholds are as follows:
Degrees Celsius
Fahrenheit
Normal
55
131
Warning
60
140
Alarm
65
149
4.6
Setting the Uptime
The Uptime is the date at which the node was activated or deactivated (up or down).
Using the Uptime feature, you can view how long how long the system has been running, how
many users are currently logged on, and the system load average. In addition, you can see the
current time.
To view the system uptime, run the following command from the sRB-20210G admin
or privileged mode:
10G> uptime
02:32:56 up 1 day, 3:27, load average: 0.37, 0.39, 0.36
4.7
Checking the Device Software Version
4.7.1
Device Version via the GUI
To view the version information via the GUI:
On the sRB-20210G (zoom view) graphical representation, right click on the 10G gray area
and select
About
, as shown in the figure below.
